• HDMI Video Wall Controller over IP
  • HDMI Video Wall Controller over IP
  • HDMI Video Wall Controller over IP
  • HDMI Video Wall Controller over IP
  • HDMI Video Wall Controller over IP
  • HDMI Video Wall Controller over IP

Model : AV-950

Q'ty :

Add To Inquiry

For HDMI Video-Wall configuration, the system provides Single Transmitter mode and Multiple Transmitters mode. The Single Transmitter mode means only One Transmitter is need for the whole Video-Wall block (only need one TX for a 3 x 3 video-wall), the Multiple Transmitters mode means one Transmitter is need for each Row of a video-wall block (needs 3 TXs for a 3 x 3 video-wall). It is very easy and flexible to expand your Video-Wall from 2 x 2 to 3 x 3 and up to 8 x 8 by adding transmitter and receiver units. The system provides high flexibility for expansion. A Transmitter is required for each row of displays and a Receiver unit is required for each individual display. It is very easy and flexible to expand your video-wall from 2 x 2 to 3 x 3 and... up to 8 x 8 by adding transmitter and receiver units. This illustrates the setup of 2 TX units, 1 stand-alone RX unit, 4 video-wall RX units (2 x 2) in Single Transmitter mode, 2 HDMI input sources (one PC and one PS3). In relation to the video wall system, 2 TX units can interchange the film source, through the Gigabit switch to connect with 5 RX units. 4 RX units consist of 2 x 2 Video Wall, 1 RX unit connect to display in local for users to watch Video Wall situation.

2x2 Video Wall

AV-950 2x2 Video-Wall



3x3 Video Wall

AV-950 3x3 Video-Wall

AV-950T
AV-950R
AV-951R100

Model No. Transmitter Receiver
AV-950T AV-950R AV-951R100
Connectors
 
HDMI Input
1 N/A
HDMI Output
1 (Local loop output) 1
Power 5V/2A
Network Port 1 x RJ-45 Female Gigabit
USB Upstream B Type 1 N/A
USB Downstream A Type NA 4 N/A
Vesa 100 Mounting N/A N/A VESA 100
3.5mm Stereo Line-Out N/A 1 N/A
3.5mm Micphone-Jack N/A 1 N/A
IR remote control (option) 1 x IR Blaster 1 x IR Receiver
RS-232 (option) Yes
Remote On/Off (option) Yes
Resolution 1920 x 1080 @ 60Hz ( or 1080p )
Inter-connect Cable CAT 6 / 7
Enviornment
Operation Temperature
0 ~ 70°C
Storage Temperature
-20 ~ 85°C
Humidity
0 ~ 80% Non-condensing
Physical Properties
Material
Metal (Black)
Weight
577 g 579 g 376 g
Dimension (L x W x H)
160 x 140 x 30 mm 160 x 140 x 30 mm 135 x 110 x 25 mm



proimages/Icon/circle-icon.png Support HD video 1080p and PC 1920 x 1080 @ 60Hz resolution.
proimages/Icon/circle-icon.png Based on standard Internet Protocol, any Gigabit or Fiber Optical Ethernet switch can be used for inter-connection. Easy cabling, easy installation and easy maintenance.
proimages/Icon/circle-icon.png Support many-to-many mode for group broadcasting if the Ethernet switch has the IGMP function.
proimages/Icon/circle-icon.png The HDMI / DVI video input source can be remote from the video-wall displays anywhere within the local network.
proimages/Icon/circle-icon.png Cost effective, with high flexibility for expansion. Simple to move from 2 x 2 to 3 x 3 and up to 8 x 8.
proimages/Icon/circle-icon.png Integrated support with the IR / USB bridge extension. You can use the IR remote controller or USB keyboard / mouse at the Receiver site to control the Blu-ray player or PC at the source site.
proimages/Icon/circle-icon.png Windows based Management Software is available to configure the IP address, Multicast / Unicast, RS-232 baud rate, Video-Wall enable / disable.
proimages/Icon/circle-icon.png Plug-and-play setup and an embedded Management Control Web-Page in the transmitter unit. Simply use Web Browser to manage video-wall settings and operation.
proimages/Icon/circle-icon.png FCC, CE and RoHs.


template.gif